Wireless Light Switch Kit – Battery-Free Kinetic Wall Switch with 10A RF Receiver, 433.92MHz

Name: Wireless Light Switch Kit – Battery-Free Kinetic Switch, 10A | BRIGHTEX
SKU: SPW001
Price: 18.96 GBP
Availability: InStock

£18.96 Inc. VAT£15.80 Exc. VAT

100 in stock

Technical Specifications

Add a light switch anywhere without running cable. Each press of this kinetic wall switch powers itself and sends a 433.92MHz signal to the 10A receiver, which switches your light on or off – no batteries to replace and no wiring to the switch.

Model No.	SPW001
Type	10A 1-gang wireless switch kit (wall switch + receiver), 2-way capable
Wall switch	Kinetic, self-powered – no battery, no wiring
RF frequency	433.92MHz
Control distance	Up to 30m indoors (walls and metal reduce range)
Receiver input / output	AC 100–240V, 50/60Hz
Rated current	10A
Load rating	Resistive up to 2000W; inductive up to 200W

Description

BRIGHTEX Wireless Light Switch Kit – Battery-Free Kinetic Switch with 10A Receiver

The SPW001 kit lets you add a light switch beside the bed, at the top of the stairs, on a landing or by a second door without cutting channels or chasing cable. The slim wall switch is self-powered: pressing it generates the energy needed to send the signal, so there is no battery to buy, replace or leak. The receiver sits behind the light fitting or ceiling rose and switches the load on or off.

Key features

No batteries, ever – kinetic wall switch powers itself with every press.
No wiring to the switch – fix it to the wall with the adhesive strips supplied.
433.92MHz RF control – up to 30m indoors; walls and metal reduce range.
Pre-paired at the factory – ready to use once the receiver is installed.
10A receiver – AC 100–240V, 50/60Hz, for lighting and other simple on/off loads.
2-way capable – receiver terminals S1 and S2 allow connection of an existing 2-way switch.

Specifications

Model No.	SPW001
Type	10A 1-gang wireless switch kit (wall switch + receiver), 2-way capable
Wall switch	Kinetic, self-powered – no battery, no wiring
RF frequency	433.92MHz
Control distance	Up to 30m indoors (walls and metal reduce range)
Receiver input / output	AC 100–240V, 50/60Hz
Rated current	10A
Load rating	Resistive up to 2000W; inductive up to 200W
Wall switch size	Approx. 86 x 86mm
Receiver size	Approx. 49 x 42 x 31mm
Receiver terminals	Lout, Lin, S1, S2, Nin, Nout
Operating temperature	-10°C to +70°C
In the box	1 wireless wall switch, 1 receiver, 2 adhesive strips, 1 user manual

Check before you buy

The receiver needs both live and neutral.
On/off control only – not for use with dimmers or dimmable circuits.
Not for installation in metal back boxes.

Pairing

The kit is supplied pre-paired. To pair another switch, press the receiver learning button until the indicator enters pairing mode, then press the wireless switch once. Hold the receiver button for 8 seconds to clear pairing.

Installation

The receiver connects to mains power and must be installed by a qualified electrician with the power isolated, in line with current Wiring Regulations.